Front left ball joint for Toyota Corolla models with independent front suspension.
Configured specifically for the LH position on the front axle.
Supplied as a standard replacement for front suspension service.
-
Front brake disc for Toyota Corolla models with front disc brake systems.
Designed specifically for front axle brake assemblies.
Supplied as a standard replacement for routine brake disc service. -
Outer tie rod end for Toyota Corolla steering systems.
Configured specifically for the left-hand (LH) outer position at the wheel end.
Supplied as a standard replacement for steering linkage service. -
Front left control arm for Toyota Corolla models with independent front suspension.
Configured specifically for the LH position on the front axle.
Supplied as a standard replacement for front suspension service. -
This front shock absorber fits Toyota Hilux pickup models across common production years.
It supports stable front suspension damping and steering control.
The steel-bodied design provides durability under repeated load cycles.
OE reference 48510-0K040 confirms compatibility with Hilux front suspension systems.
Position-specific installation is required. -
This front shock absorber fits Toyota Corolla passenger vehicles.
It supports stable front suspension damping and steering control.
The steel-bodied construction ensures durability under daily driving conditions.
OE reference 48520-09A71 confirms compatibility with Corolla front suspension systems.
Position-specific installation is required. -
This front bumper fits Toyota Hilux pickup models.
It supports frontal protection and exterior alignment.
The molded plastic construction allows paint matching to vehicle color.
OE reference 52119-0K040 matches standard Hilux front bumper designs.
Vehicle verification is recommended before installation. -
This front shock absorber fits Chevrolet Onix passenger vehicles.
It supports stable front suspension damping and steering control.
The steel-bodied construction ensures durability under daily driving conditions.
OE reference 52119533 confirms compatibility with Onix front suspension systems.
Position-specific installation is required. -
This front shock absorber fits Renault Sandero passenger vehicles.
It supports stable front suspension damping and steering control.
The steel-bodied construction ensures durability under daily driving conditions.
OE reference 5430200Q0H confirms compatibility with Sandero front suspension systems.
Position-specific installation is required. -
Oil filter for Fiat 500 1.4 petrol models.
Supplied as a standard replacement part for routine engine oil service.
OE reference 55191980 supports accurate catalogue identification.
Suitable for regular maintenance and consolidated parts orders. -
The 5M51-9155-AA fuel filter supports clean fuel delivery for Volvo S40 engines using a layered media system that removes rust flakes, moisture, and fine particles. Its reinforced housing maintains stable internal pressure, while the accurately shaped connectors support secure installation. Built for varied driving conditions, this OE-fit filter helps maintain smooth combustion, consistent acceleration, and long-term durability for essential fuel system components.
-
This oil filter fits Fiat Strada models with the 1.4 Flex petrol/ethanol engine.
It features a spin-on metal housing and threaded base with an integrated seal for secure installation.
OE reference 6000605218 matches multiple Fiat Strada catalog listings.
Designed for stable contaminant control during routine service intervals.
Verify engine application before installation. -
The 6460920001 fuel filter fits Mercedes-Benz vehicles powered by the OM646 diesel engine, including Sprinter W906, Vito W639, and selected C-Class and E-Class diesel models.
It removes fine contaminants and moisture before fuel enters the high-pressure pump, supporting stable performance and smooth combustion.
Cross-references include 6460920101 and 0024773001, covering multiple OM646 injection platforms. -
The 6510901552 fuel filter fits Mercedes-Benz vehicles powered by the OM651 2.1L diesel engine.
It supports clean fuel delivery by removing fine contaminants before fuel reaches the high-pressure system.
This filter is commonly used in Sprinter, Vito, and selected passenger car diesel platforms.
Cross-references include 6510900252 and 6510900052, covering multiple OM651 applications. -
The 77363652 fuel filter fits the Fiat Palio (1999–2017) using FIRE 1.0, 1.2, and 1.6 gasoline engines.
Its synthetic medium maintains clean fuel flow and supports stable combustion.
It cross-references with 46523571 and 46808398, making it suitable for workshops maintaining multiple Palio model years. -
This oil filter fits Isuzu diesel engines used in NPR and NQR commercial vehicles.
It supports common Isuzu engine families such as 4JG1 and 4JB1.
The filter maintains stable oil flow and reliable filtration performance.
Manufactured with a steel housing, it meets OEM durability standards.
Interchangeable OE references include 8-94360426-0 and 8-97035862-0.
The component installs directly during routine diesel engine service. -
This oil filter fits Isuzu D-Max diesel pickup models produced from around 2012 onward.
It supports common 3.0L diesel engine configurations.
The filter maintains stable oil flow and reliable filtration performance.
Manufactured with a steel housing, it meets OEM durability expectations.
The primary OE reference is 8-98035693-0.
The component installs directly during routine diesel engine service.
-
The 8-98194119-0 fuel filter fits 2012–2019 Isuzu D-Max using 2.5L and 3.0L diesel engines. Its multilayer media captures water, sediment, and fine particles, while the reinforced housing maintains pressure stability for mixed driving conditions. Also suitable for Isuzu MU-X 2013–2019 and Holden Colorado 2012–2016, with cross-references including 8-98240497-0 and P550965. Designed for dependable diesel filtration and long-term injector protection.
-
Right headlamp assembly for Toyota Hilux models.
Designed as a standard replacement for the original right-side front lamp.
Suitable for exterior repair and parts consolidation orders. -
Left headlamp assembly for Toyota Hilux models.
Designed as a standard replacement for the original left-side front lamp.
Suitable for exterior repair and parts consolidation orders. -
This oil filter fits Renault Sandero models produced from 2012 onward.
It supports common 1.2L, 1.6L petrol and 1.5L diesel engine configurations.
The filter maintains stable oil flow and reliable filtration performance.
Manufactured with a steel housing, it meets OEM durability standards.
The primary OE reference is 8200690632.
The component installs directly during routine oil service. -
This oil filter fits Renault Clio models produced from 2012 onward.
It supports common 1.2L, 1.5L diesel, and 1.6L petrol engine configurations.
The filter maintains stable oil flow and reliable filtration performance.
Manufactured with a steel housing, it meets OEM durability standards.
The primary OE reference is 8200813465.
The component installs directly during routine oil service. -
Front wiper blade for Toyota Hilux models.
Designed as a standard replacement for the original windshield wiper.
Suitable for routine exterior maintenance and consolidated parts orders. -
Rectangular Toyota RAV4 cabin air filter for HVAC systems referencing OE 87139-0R010.
Supplied as a pleated interior air filtration unit for direct replacement. -
MAP sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89420-02070 intake pressure measurement specifications.
Supplied as a standard replacement for manifold pressure sensing service. -
MAP sensor for Toyota Corolla 2.0L petrol applications.
Matched specifically to OE 89420-02110 intake pressure specifications.
Supplied as a standard replacement for manifold pressure sensing service. -
MAP sensor for Toyota Corolla 2.0L petrol applications.
Matched specifically to OE 89420-02130 intake manifold pressure specifications.
Supplied as a standard replacement for pressure signal monitoring service. -
Downstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89465-01090 for post-catalyst monitoring positions.
Supplied as a standard replacement for emissions system service. -
Downstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89465-02110 for post-catalyst positions.
Supplied as a standard replacement for emissions monitoring service. -
Downstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89465-02330 for post-catalyst monitoring positions.
Supplied as a standard replacement for emissions system service. -
Downstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89465-02430 for post-catalyst exhaust monitoring.
Supplied as a standard replacement for emissions system service. -
Downstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89465-12840 for post-catalyst monitoring positions.
Supplied as a standard replacement for emissions system service. -
Upstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89467-02090 for pre-catalyst positions.
Supplied as a standard replacement for emissions system service. -
Upstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89467-02140 for pre-catalyst positions.
Supplied as a standard replacement for emissions system service. -
Upstream oxygen sensor for Toyota Corolla petrol applications.
Matched specifically to OE 89467-12010 for pre-catalyst positions.
Supplied as a standard replacement for emissions system service.
