H6 3rd Gen Front Brake Disc Overview
The H6 3rd Gen Front Brake Disc with OE 3501112AGW01A is designed for the front braking system of the third-generation Haval H6 HEV platform. This component forms the rotating friction surface that works together with brake pads to slow the vehicle during braking.
Each H6 3rd gen front brake rotor is mounted directly to the wheel hub and rotates with the wheel assembly. When the driver applies the brake pedal, the caliper presses brake pads against the rotor surface. Friction between the pad material and the disc converts vehicle motion into heat, allowing controlled deceleration.
Unlike earlier H6 platforms, the hybrid system integrates regenerative braking with conventional friction braking. As a result, the front brake disc must maintain stable performance even when braking loads vary between mechanical braking and energy recovery phases.
The rotor surface and internal structure help distribute braking heat across the disc area. Proper heat distribution helps reduce uneven wear and maintains braking consistency during repeated braking cycles.
Vehicle Compatibility – H6 3rd Gen Front Brake Disc
This front brake disc for H6 3rd gen is designed for the front axle braking system used in the third-generation Haval H6 HEV platform. The braking architecture in the hybrid model uses revised brake control logic and rotor dimensions compared with earlier gasoline versions.
Typical applications include:
Installation requires verification of rotor diameter, mounting hole pattern, and disc thickness to ensure compatibility with the brake caliper and wheel hub.
For cross-reference purposes, the interchangeable OE 3501112XGW01A may appear in parts listings for the same H6 braking configuration. Compatibility should be confirmed against the specific brake system specification before interchange.
Basic Quality & Supply Information
The Haval H6 3rd generation front brake disc is supplied as an OE-equivalent replacement rotor used in brake system maintenance. The rotor body is produced from cast iron designed to withstand repeated thermal cycles generated during braking.
During operation, the rotor absorbs braking heat generated from friction between the brake pads and the disc surface. Proper rotor thickness and structural balance help maintain braking stability and reduce vibration during braking.
Manufacturers produce these Haval H6 front brake rotor components according to dimensional specifications that match the original braking system design. Accurate machining ensures correct hub fitment and balanced rotor rotation.
Distributors often source these components through an experienced brake system manufacturer or 3501112AGW01A brake rotor supplier capable of maintaining stable production batches and export packaging standards.
Packaging & Ordering Information
Each H6 3rd gen front brake rotor is packed in protective inner packaging to prevent surface damage during transport. Protective coatings or anti-rust oil may be applied to reduce corrosion risk during storage.
Outer cartons are reinforced to support pallet stacking and containerized shipping. Packaging configurations can be optimized depending on distributor inventory requirements and shipment volume.
Batch identification labels may also be provided to support warehouse traceability and logistics management.
Ordering FAQ
Q1: Is this H6 3rd Gen Front Brake Disc used for the rear brake system?
No. OE 3501112AGW01A corresponds to the front brake rotor.
Q2: Can this front brake disc for H6 3rd gen fit earlier H6 models?
Earlier generations use different rotor dimensions and brake system configurations.
Q3: What is the difference between 3501112AGW01A and 3501112XGW01A?
Both numbers may appear in parts catalogs for the same braking system configuration. Fitment verification is recommended.
