T15-8403101-DY Front Left Fender for Chery Tiggo 7

Overview

T15-8403101-DY Front Fender LH for Chery Tiggo 7 is the outer body panel at the front-left wheel opening. Bilink Auto Parts handles inquiries for this front left fender using the complete reference and panel position. LH means the vehicle’s left side when facing forward; avoid relying on a photograph that may be mirrored.

The fender forms part of the visible body contour around the wheel. Its shape meets neighboring body panels, so a replacement inquiry should consider both appearance and mounting alignment. This outer panel differs from the wheel-arch liner, which sits inside the wheel opening. It also differs from the bumper, bonnet and rear quarter panel. Identifying the damaged component accurately helps keep a body-repair order focused on the parts the workshop needs.

Vehicle & Application

Chery Tiggo 7 Front Fender LH

For a Chery Tiggo 7 front fender LH inquiry, keep reference T15-8403101-DY alongside the full vehicle name. The left and right panels are separate ordering positions; a matching model name alone does not identify the side.

OE References and Applications

• Primary OE/reference: T15-8403101-DY
• Application: Chery Tiggo 7
• Position: front left, LH
• Product: outer front fender

Use this complete reference when comparing quotations. Do not substitute another part number based on appearance alone. Browse the Chery Tiggo 7 parts range when planning a wider repair order, and identify adjacent panels separately.

Basic Quality & Supply

When assessing a replacement outer fender, examine the panel face under angled light for dents or waviness. Check wheel-arch edges and mounting flanges for distortion, then compare mounting-hole locations with the removed panel. Inspect the upper contour and the edges that meet adjacent panels; a bent edge can complicate alignment even when the broad face looks sound.

Ask the workshop to trial-position the panel before final finishing. This separates panel alignment from paint work and helps reveal damage to surrounding supports. Replacement of an outer fender alone does not correct displaced mounting points. These checks give buyers a practical basis for discussing panel condition and preparation with Bilink Auto Parts.

Packaging & Ordering

A fender’s broad face and projecting edges need attention during shipment. Specify protection around the wheel-arch lip and mounting flanges, separation from hard or heavy items, and support that avoids concentrated pressure on the panel. For mixed left/right orders, request clear model, reference and side labels on each package. Ask for the packing arrangement in the quotation so receiving staff know what to inspect.

Send Bilink Auto Parts your VIN, model year, market/configuration, quantity, destination and photographs of the existing front-left panel and its attachment areas. At quotation, confirm vehicle suitability, the offered panel’s material and finish, and any fittings or adjacent components required. Agree the itemized contents, packing and commercial terms before ordering.

Ordering FAQ

Is this the left front or right front panel?

This page covers the front left outer fender. Use LH and front left together on the purchase order, measured from the vehicle’s forward-facing orientation.

Which photos help with a damaged fender?

Include one view showing the whole left front corner and closer views of the wheel opening and attachment edges. A close-up alone may hide which panel is damaged.

How should an importer check a mixed-panel shipment?

Match each package label against the purchase order before unpacking. Keep left and right panels identifiable, record any crushed packing, and inspect exposed edges before moving panels into storage.