T15-3501080 Brake Pads for Chery Tiggo 7

Product Overview for Tiggo 7 brake pads

Tiggo 7 brake pads with OE reference T15-3501080 are supplied for the front axle of applicable Chery Tiggo 7 vehicles. This replacement set is intended for importers, distributors, repair networks, fleet maintenance buyers, and Chinese-vehicle parts specialists who need a clear OE anchor and repeatable supply. Because brake-system specifications may change by production period and destination market, the OE number, VIN, caliper layout, and existing pad shape should be checked before an order is released.

The product is positioned for normal aftermarket brake service and scheduled wear-part replacement. In addition to basic caliper fit, professional buyers should review the backing-plate outline, friction-block dimensions, shim and clip configuration, wear-indicator arrangement, and the required carton quantity. These checks reduce the risk of receiving a pad that looks similar but belongs to another Chery brake package.

For distributor programs, consistent specification control is especially important. A fast-moving reference may be ordered repeatedly, combined with filters or suspension parts, and delivered to several branches. Clear batch identification, stable pad geometry, controlled packing, and retained approval information help purchasing teams manage replenishment without rechecking every shipment from the beginning.

Workshops and fleet buyers also benefit from accurate application data. When the original marking is unclear, Bilink recommends sending the VIN, vehicle year, front and rear photographs of the removed pad, and a simple dimension check. This verification-first approach supports faster quotation and helps avoid installation delays after the vehicle has already entered the service bay.

Vehicle & Application Scope for Tiggo 7 brake pads

Tiggo 7 brake pads OE T15-3501080 are primarily cataloged for front-axle service on applicable first-generation Chery Tiggo 7 vehicles. Fitment can vary by engine, trim, production date, sales region, and brake-caliper supplier. The model name alone is therefore not sufficient for a safety-related component, and buyers should confirm the full vehicle identity before volume purchasing.

The normal application review should include the model year, VIN, engine or trim where available, destination market, axle position, old-part marking, and caliper configuration. For quotation screening, aftermarket catalog information commonly lists reference dimensions of approximately 148.1 mm width, 63.3 mm height, and 18 mm thickness. These figures are useful for comparison, but the approved sample or drawing remains the final purchasing reference. A secondary catalog listing for OE and dimensional comparison is available from Segal.

Some related Chery platforms may use visually similar front pads, including selected Tiggo 4, Tiggo 8, Tiggo 8 Pro, or Jaecoo J7 applications. Similar appearance does not establish direct interchange. Related OE references such as T15-6GN3501080, T15-3501081, T1EJ-3501080, 204002139AA, and 3370100084 should be treated as catalog candidates only until the plate profile, dimensions, sensor or hardware arrangement, and caliper match are confirmed.

For shared-platform sourcing, Bilink can organize a comparison using an OE list, samples, photographs, or drawings. This is helpful when an importer wants to consolidate several Chery maintenance items into one shipment. It also keeps the primary T15-3501080 application separate from other pad families that may require a different friction block, shim, clip, or packing label.

Basic Quality & Supply Information

The pad assembly uses a formed steel backing plate with bonded friction material. For purchasing teams, the practical quality points include plate flatness, edge finish, dimensional stability, bonding consistency, friction-material uniformity, and the correct noise-control and accessory configuration. These details should be aligned with the approved specification before production so that repeat orders follow the same commercial and technical reference.

As a Chery brake pads supplier, Bilink supports verification for standard replacement demand as well as buyer-defined programs. Depending on the order plan, review points can include appearance, key dimensions, pad profile, backing-plate condition, batch marking, label content, and packing inspection. Any requested friction documentation, material restrictions, market-specific test information, or private quality standard should be stated at the quotation stage.

For front brake pads wholesale orders, one accepted sample is only the starting point. Stable replenishment requires controlled specification records and clear communication when any component or packaging detail changes. Buyers may request sample retention, lot identification, pre-shipment photographs, or a defined inspection plan according to their market and after-sales process.

Two supply routes are practical. Existing customers can use a replenishment route based on a previously approved OE, sample, and packing standard. New applications should use a verification-first route with VIN, old-part photographs, drawings, or dimensions. Separating these routes makes quotations clearer and protects both urgent stock orders and new-fitment development work.

Packaging & Ordering Information

Brake pads are compact but relatively heavy friction parts, so packaging should protect the pad faces, shims, clips, and finished edges while preventing sets from mixing in transit. Bilink can discuss neutral export packing, Bilink packing, or buyer-approved private-label requirements. Final carton construction and quantity should be confirmed according to order volume and destination handling conditions.

For warehouse control, inner and outer labels should clearly identify the OE number, front-axle position, set quantity, item description, and any buyer barcode or batch requirement. This is particularly important for mixed Chinese-vehicle shipments where several pad shapes can appear similar after cartons are opened. Clear labels support receiving, shelf location, branch transfer, and warranty traceability.

Before order confirmation, please provide:

• OE number T15-3501080;
• vehicle model, production year, market, and VIN where available;
• confirmation that the required position is the front axle;
• old-pad photographs, sample, drawing, or main dimensions for new applications;
• required quantity and shipment plan;
• packing, barcode, label, and private-brand instructions.

Importers may combine this item with filters, suspension parts, or other Chery service references to improve shipment efficiency. The safest consolidation method is to maintain a separate OE and vehicle line for every SKU, then approve quantities and packing marks before production. This reduces picking errors and gives purchasing personnel a clearer record for repeat orders.

Ordering FAQ

Q1. Is T15-3501080 for the front or rear axle?
It is supplied as a front brake pad reference for applicable Chery Tiggo 7 vehicles. Confirm the axle position on the purchase order and compare the removed pad before installation.

Q2. Can the same pad be used directly on Tiggo 4, Tiggo 8, or Jaecoo J7?
Not automatically. Related vehicles may share a catalog family or similar plate outline, but different OE numbers, calipers, dimensions, shims, and hardware can apply. Use VIN, OE, sample, or drawing verification before treating any related model as interchangeable.

Q3. What is the main purchasing risk for this item?
The main risk is approving the part only by vehicle name or visual similarity. Market versions and production changes can create several brake configurations. OE, axle, dimensions, pad profile, and caliper details should be reviewed together.

Q4. What information helps Bilink quote a stock order quickly?
Send the OE number, required quantity, destination market, packing method, and previous approval record if available. For a new application, add the VIN and clear photographs or a sample of the original pad.

Q5. What can be checked before shipment?
The agreed inspection scope may cover appearance, dimensions, profile, item and batch labels, packing quantity, carton marks, and pre-shipment photographs. Any additional buyer standard should be written into the order requirements before production.

Browse more related items in our Chinese car parts collection, or review the Tiggo 7 Pro oil filter for mixed maintenance-part sourcing.