Haval H6 Inner Tie Rod 3411115XKZ36A

Overview

The 3411115xkz36a inner tie rod is a front inner steering component for selected Haval H6 applications. Catalogs also describe this component as an axial joint. Its verified OE reference is 3411115XKZ36A. Use that reference when preparing an inquiry with Bilink Auto Parts.

In a rack-and-pinion steering system, the inner tie rod connects the steering rack to the outer tie rod end. Therefore, identify which connection your repair requires before selecting a quotation line. This listing concerns the inner rod, rather than the outer end or a complete steering rack. Also, keep the component description alongside the OE number when comparing supplier responses.

Vehicle & Application

Haval H6 inner tie rod application

Manufacturer catalogs associate this reference with Great Wall Hover H6, while a professional parts catalog names Haval H6. Together, these sources support the H6 vehicle family. However, they do not establish suitability for every H6 variant. Confirm the exact year, engine, generation, drivetrain and market against the vehicle before ordering.

Manufacturer catalogs identify the front inner axial joint at the front axle, with left and right coverage. However, position coverage does not establish the number of rods in a quotation.

Primary OE: 3411115XKZ36A. No Alternate OE or Related OE reference has verified applicability for this listing. Therefore, keep other numbers on separate inquiry lines until documented interchange or supersession supports a substitution. For broader sourcing, browse our Haval H6 parts.

Basic Quality & Supply

Haval H6 inner tie rod inspection points

For this rack-side component, ask the workshop to compare both connection interfaces before accepting a replacement. If the removed rod differs from the catalog description, request confirmation of the overall rod length too. Record thread diameter and pitch as comparison questions; this listing supplies no verified values.

Also, inspect the rack bellows and clamps while planning inner tie rod service. Their condition may affect the list of separately required repair items. After replacement, treat the previous rod adjustment as an initial setting. A final alignment check against the applicable vehicle specification remains a separate service step. Use the vehicle’s repair information for the actual procedure.

Packaging & Ordering

Haval H6 inner tie rod order details

Send the VIN, existing OE reference, requested front inner position and required quantity with your inquiry. Then ask whether each quoted unit represents one inner rod or a pair. Keep left-side and right-side quantities clear even when a catalog lists both positions.

Also, request a written list of any included bellows, clamps, locking hardware or outer tie rod ends. Ask for separate pricing where those items fall outside the rod quotation. For packing, request protection for both connection interfaces and identification that preserves the OE reference. Finally, confirm the offered brand, unit packing, lead time and commercial terms against the identified item and quantity.

Ordering FAQ

Haval H6 inner tie rod ordering questions

Is this the inner rod or the outer end?

This is the front inner tie rod, also called an axial joint. Therefore, identify the rack-side component on your repair request.

Does OE 3411115XKZ36A cover every Haval H6?

No universal H6 fitment claim applies here. Instead, confirm the vehicle details and existing reference before accepting the quotation.

Does left and right coverage mean two rods?

No. It describes catalog positions. Therefore, ask the supplier to state the quantity within each quoted unit.

Can another H6 OE replace this reference?

Only treat a different reference as interchangeable after obtaining applicable interchange or supersession evidence. Until then, quote it separately.

Why plan an alignment check after tie rod replacement?

The previous adjustment provides an initial setting. However, the workshop still needs to check alignment against the applicable vehicle specification.

Which details should the quotation settle?

First, settle the rack-side interface, outer-end connection and rod length when identification remains uncertain. Then confirm unit quantity and accessory scope.