Identify the Haval H6 front wheel hub bearing assembly by Primary OE 3103100XGW01A and its integrated product form. Conservative evidence supports Haval H6 2023–2025 at either front side. Use named PRORUN and Nakata catalog specifications as comparison references, not universal supply guarantees. Their diameter listings differ, so confirm the offered drawing, spline geometry and ABS interface against the actual vehicle. A bare hub or loose bearing is a different purchasing item. Send Bilink Auto Parts the VIN, removed-unit photographs, required quantity and destination. Commercial origin, quality evidence, packing, MOQ and delivery terms need quotation-stage confirmation.
Overview
3103100XGW01A hub bearing assembly refers to a complete Haval H6 front hub-and-bearing unit, rather than a separate service bearing. For importers, that distinction determines which physical item belongs on the purchase order. The hub provides the wheel mounting interface, while the bearing supports its rotation. However, matching the model name alone does not confirm the correct assembly.
3103100XGW01A Front Wheel Hub Bearing Assembly Identity
A loose bearing, a bare hub and an integrated assembly represent different purchasing items. Therefore, compare the removed front unit with the quoted assembly before approving a bulk line. Photographs should show the flange, spline opening and opposite face, not only the carton label.
Vehicle & Application
Haval H6 Front Wheel Hub Bearing Assembly Fitment
Primary OE: 3103100XGW01A identifies this integrated assembly for the conservative Haval H6 2023–2025 range. Component references support front-left and front-right positions. However, confirm the VIN, build date, engine, drivetrain and destination market for the actual vehicle. The year range alone does not settle its ABS arrangement or other configuration details.
Alternate OE: No alternative number has verified interchange or supersession evidence for this purchasing item. Consequently, another catalog cross-number should not replace the primary reference without further validation.
Related OE References: 3103100XKZ16B identifies a separate front hub without bearing for the independently checked Haval H6 2014–2020 range. It is not an interchangeable Alternate OE. Therefore, keep that bare-hub request separate from the integrated assembly, even when both inquiries mention Haval H6.
For a vehicle-specific mixed order, use the Haval H6 Parts page to organize related items. Then verify each additional line against its own OE and application.
Basic Quality & Supply
3103100XGW01A Front Wheel Hub Bearing Assembly Reference Checks
PRORUN’s WH311460 catalog reference lists five holes, 28 spline teeth, a 140 mm outer diameter and 114.3 mm PCD. These reference points help buyers compare the wheel interface and spline geometry with a drawing. However, they are PRORUN specifications, not guaranteed dimensions for every unit carrying this OE.
Nakata’s NKF 8782 catalog reference lists a bearing-equipped front hub with a 140.2 mm diameter. Its listing also describes five holes and 28 teeth. Because the diameter references differ, compare measurement points and the offered drawing before accepting a substitute. Do not assume a tolerance or explain the difference as rounding without evidence.
PRORUN’s WH311460 catalog reference also specifies a 96-tooth ABS signal ring. However, that reference does not establish the supplied sensor, wiring harness or vehicle-side signal compatibility. Request interface details and a sample comparison for the actual assembly.
Finally, distinguish commercial origin from dimensional suitability. Verify any genuine or original-channel claim; OEM terminology needs supporting evidence, while aftermarket identifies a replacement supply category. Confirm the offered quality grade and inspection documents instead of assuming certification or warranty coverage.
Packaging & Ordering
Ordering the Haval H6 Front Wheel Hub Bearing Assembly
Ask Bilink Auto Parts to confirm protection for the hub flange, spline opening and sensor-related interface in the packing proposal. For mixed hub orders, identify each carton line by its own OE and product form. This separates complete assemblies from bare hubs at receipt.
Also, include quantity, destination and labeling needs in the inquiry. Confirm MOQ, stock, lead time and mixed-order availability in the quotation; none is a standing promise.
Ordering FAQ
Haval H6 Front Wheel Hub Bearing Assembly Buying Questions
Does this hub assembly include a loose replacement bearing?
This purchasing item combines the hub and bearing as one unit. Therefore, a request for a loose bearing requires a separate part identification.
Why do the hub diameter references differ?
PRORUN’s WH311460 catalog reference gives 140 mm; Nakata’s NKF 8782 catalog reference gives 140.2 mm. Compare the offered drawing and measurement points rather than treating either value as a universal specification.
Does the ABS ring reference include a sensor or harness?
PRORUN’s WH311460 catalog reference describes a 96-tooth ABS signal ring, not a confirmed packing list for this supply. Therefore, check the sensor interface and included components separately.
Which Haval H6 front position should an importer specify?
The conservative scope covers either front side. Still, specify the required side and quantity, and provide vehicle details with front-unit photographs.
Reliable Quality Assurance
One-Stop Parts Sourcing
Fast Professional Support
Competitive Global Pricing
